Thermocouples
K-Type Thermocouple Probe — Inconel 600
Up to 1100 °C, grounded junction, standard connector
From $30.00
RTD & Thermistor
Pt100 RTD Probe — 4-Wire, IP67
Class A element, 316L sheath, M12 process connection
$48.00
$56.00
/ unit · ex-works
SKU TS-PT100-4W
In stock · ships within 48 hours
Free DHL over $200.00
Calibration certificate included
3-year warranty
Overview
The workhorse probe for chillers, boilers and process skids. A Class A Pt100 element is potted into a 316L stainless sheath, then sealed to IP67 for washdown and outdoor installation.
Four-wire construction removes lead resistance from the reading, so you keep ±0.15 °C accuracy even with a 3-metre extension. Order today and it is calibrated, labelled and on the DHL van within 48 hours.
- 4-wire Class A Pt100, IEC 60751
- 316L sheath, Ø6 mm, pressure tested to 40 bar
- M12×1.5, G1/4 or 1/2" NPT process thread
- 3 m PTFE cable, custom lengths on request
Technical specifications
| Element | Pt100, Class A (IEC 60751) |
|---|---|
| Temperature range | −50 … +250 °C |
| Accuracy | ±0.15 °C at 0 °C |
| Sheath | 316L stainless steel, Ø6 mm |
| Process connection | M12×1.5 (standard) |
| Cable | 3 m PTFE, 4-wire, shielded |
| Ingress protection | IP67 |
| Response time | t90 < 8 s (water, 0.5 m/s) |
Shipping & documents
DHL / FedEx express, 3–6 working days worldwide. Duties and taxes are paid by the receiver unless agreed otherwise.
Included with every unit: 3-point calibration certificate, material traceability sheet and wiring diagram. 2D/3D drawings and 3-A / ATEX documents are available on request.
Related products
Infrared & Non-contact
Fixed Infrared Pyrometer — −50 … 1000 °C
20:1 optics, 4–20 mA + RS485, adjustable emissivity
From $164.00
Transmitters & Controllers
DIN-Rail Temperature Transmitter — 4–20 mA
Universal RTD / TC input, 24 VDC, 1500 V isolation
$75.00
RTD & Thermistor
NTC 10K Thermistor — B3950, 1 %
Low-cost air and surface sensing for HVAC controls
$6.50